As a car buff and music lover, I’ve always been intrigued by the science of getting the perfect sound system in a vehicle. One key to getting great sound is using soundproofing materials.
Kilmat and Siless are two well-known options that promise to lessen vibrations and road noise, making listening more fun and immersive.
Many choices exist, making it tough to pick the correct substance for oneself.
Soundproof Living tested Siless and Kilmat to see which was better at reducing sound. Siless did better, reducing sound by 31 decibels compared to Kilmat’s 29 decibels. This is strange because Siless is thinner and lighter. But, it’s only one test and how well it’s installed can also matter.
the main difference between them is that Kilmat claims their mats can reduce noise by 50%, on the other hand, Siless asserts their products can reduce noise by 70%. So while both offer similar rubber and foil mats, Siless has a wider range of products and claims to offer superior noise reduction capabilities compared to the well-known Kilmat brand.
In this article, I will compare Kilmat vs Siless in detail, looking at what they offer and what their downsides are, so you can decide which one is best for your situation.
The main difference between Kilmat and Siless is that Kilmat is a heavier, denser butyl-based sound deadener while Siless is a lighter-weight recycled textile material. Kilmat is thicker and provides maximum noise cancellation, blocking engine noise, road noise, vibrations, etc.
Siless is made from recycled denim and other fibres so it’s an eco-friendly option, but less dense so not as effective for soundproofing. For most everyday drivers, Siless provides adequate sound dampening at a lower cost.
However, for car enthusiasts, audio installers or professional builders seeking the highest level of sound deadening, Kilmat remains the top choice over other options like Siless.
Kilmat’s superior density and butyl composition make it the gold standard for automotive noise reduction.
What is Sound Deadening Material?
Sound-deadening stuff quiets a car by absorbing noise and vibration. It’s made of materials like butyl, rubber, foam, and asphalt that soak up sound waves so they don’t bounce around inside the vehicle.
You can put sound-deadening material in many parts of a car like doors, roofs, floors, and trunks. It helps to lower road, engine, and wind noise, which makes the ride less noisy and more enjoyable.
You can pick from different kinds of sound-deadening material that have unique features and advantages. Kilmat and Siless are two common brands that people often compare.
Kilmat Sound Deadening Material
Kilmat quiets the loudness in cars and boats. It’s made of butyl rubber and foil, which soak up sound waves and cut down on noise. Put Kilmat on the doors, roof, floor, and anywhere else in the vehicle to improve sound and comfort. Car buffs and pros in the auto biz often use it.
Advantages of Kilmat
Kilmat, a top player in the hushing sound business, has got you covered with high-grade and low-priced materials for your ride. Check out the perks of using kilmat sound-deadening solution:
- Kilmat packs a punch with its butyl and foil components, serving as ace soundproofing stuff to suppress unwanted noise and tremors coming from the road, engine, and gusts.
- Kilmat’s self-adhesive backing makes it a cinch to set up on any surface, including metal, plastic, and fibreglass.
- Kilmat is a safe bet with its heat endurance and fire retardant, ensuring that your car is soundproofed safely.
- Kilmat is a stayer with its hard-wearing quality that provides long-term soundproofing performance.
- Kilmat comes in varying sizes and thicknesses that cater to any car model and budget.
disadvantages of Kilmat
Kilmat dampens sound well, but has downsides to know before buying:
- It’s not as good as Dynamat or SoundShield for reducing deep noise and shakes.
- While fixing, it may smell bad, and need airflow.
- Kilmat may fail in harsh climates, like hot or cold weather, so it’s not always the best choice.
here is the installation process of kilmat in the pickup van:
what is Siless Sound Deadening Material?
Siless quiets cars. Its synthetic rubber, butyl, stifles sounds and shakes that disturb drivers. Stick it inside car doors, trunks, and any spots that cause a commotion.
Siless is a cheap and efficient solution for auto aficionados. Just peel and paste the material on the car’s interior surfaces. Siless bends and slices easily, fitting any car’s curves.
Advantages of Siless
- Easy to put in: Siless is made to be straightforward to install. With a self-adhesive layer, the installation is easy.
- Effective: Siless works well to reduce noise. It can bring down noise levels up to 50%. Its high-grade materials soak up sound waves and keep them from bouncing around.
- Reasonable: Compared to high-end brands such as Dynamat, Siless is a cost-effective option. It won’t break bank if you are on a budget.
- Long-lasting: Siless is built to last using high-quality materials. It resists environmental factors like moisture, heat, and more that can cause it to deteriorate over time.
Disadvantages of Siless
- Siless not as good as Dynamat: Siless works to stop sound, but not as well as fancy Dynamat. If you want the very best sound-stopping, then you should think about spending more money on a pricier option.
- Might not work for really hot or cold weather: Siless can handle the heat, but it might not work for very hot or very cold weather. If you live in an area with extreme temperatures, then you should think about a different sound-stopping material.
- Might not work for tough jobs: Siless can last for a while, but it might not work for really tough jobs. If you need sound-stopping material for work or industry, then you should think about another choice.
Kilmat vs Siless: Comparison
Noise Reduction Comparison
To get a quiet drive, you need sound-deadening stuff. Two brands people talk about are Kilmat and Siless. Let’s compare how they make noise go away.
Kilmat is a famous brand that sells mats made of rubber and foil. They say it can cut vibrations and road noise by 50%. The mats stick well and you can put them on the floor, doors, and roof of your ride.
Siless is a new brand with different stuff to kill noises, like sprays and foams, but they also have mats made of rubber and foil, sometimes with foam. They say Siless can cut vibrations and noise by 70%.
Even though both brands use similar stuff, Siless seems to work better than Kilmat. Remember, different cars have different outcomes. The brand and type of car matter, and so do factors such as the tires and road conditions.
Kilmat and Siless are popular sound-deadening materials. Which one is better? Let’s compare them.
Kilmat is made of butyl rubber with an aluminium foil layer. It reduces vibrations and road noise, making rides quieter and more comfortable. Kilmat is durable, water-resistant, and heat-resistant, so it’s perfect for vehicles.
Siless is also a sound-deadening material made of butyl and foil, but it has added closed-cell foam for more sound insulation. It reduces vibrations and noise and is more temperature-resistant.
The better option depends on your needs. Kilmat is durable and effective, while Siless is better for extreme temperatures and additional sound insulation.
Kilmat and Siless are sticky sheets that can be cut and stuck on surfaces. Kilmat can fit into nooks and bends, and is light to handle. Putting Kilmat involves prepping the surface, cutting the sheet to size, and applying it as instructed. The steps are easy to follow.
Siless is similar to Kilmat, but a bit thicker, making it more challenging to use. Siless also comes with easy-to-follow instructions. To apply Siless, prepare the surface, cut the sheet to size with a razor blade or scissors, and stick it on the surface according to instructions.
When buying stuff, the price is a big factor. Kilmat and Siless are both cheap compared to other sound deadeners. But, their pricing is a bit different.
Kilmat comes in different sizes and costs between $0.42 to $1.12 per square foot depending on how much is bought. The more bought, the lower the price. For example, a 50 sq. ft. roll costs around $30, while a 100 sq. ft. roll costs around $60.
Siless varies in size and prices range from $0.40 to $0.75 per square foot. Like Kilmat, the more bought, the lower the price. For instance, a 50 sq. ft. roll costs around $25, while a 100 sq. ft. roll costs around $50.
Soundproofing your vehicle can greatly enhance your audio experience, and the market offers a number of options including Siless, Kilmat, and Dynamat.
Many people find themselves caught in the ‘Siless vs Kilmat vs Dynamat’ debate when trying to decide on the best car soundproof brand. All these brands offer effective sound deadening material, each with unique features and strengths.
In terms of performance, each brand fares well, but they cater to different needs and budgets. For instance, if you’re looking for a good value-for-money option, you might consider Kilmat. It’s less expensive than Dynamat and provides impressive noise reduction.
Plus, you can easily find ‘Kilmat near me’ as it is widely available, with outlets in various locations including Australia. But does Kilmat reduce heat?
Yes, Kilmat has heat-resistant properties, further improving the comfort of your vehicle’s interior.
Dynamat, on the other hand, is often touted as the industry standard and is one of the best sound deadening materials for cars. It’s a bit more expensive than its counterparts, but the higher price comes with top-notch performance.
The Dynamat installation process is straightforward and it does an excellent job in both sound deadening and heat insulation.
A ‘Dynamat vs Kilmat’ or ‘Dynamat vs Siless’ comparison will show that Dynamat is likely to edge out in overall performance.
If you’re wondering ‘Is Siless sound deadening good?’, the answer is a resounding yes. Although Siless might not be as popular as Kilmat or Dynamat, this brand provides high-quality sound-deadening materials.
Siless sound deadening installation is pretty simple and, according to numerous Siless sound deadening reviews, the product provides excellent soundproofing results.
In the ‘Siless vs Noico’ comparison, both brands perform well, but Siless is often noted for its superior adhesive strength.
Looking specifically at the Kilmat range, you might wonder about the difference between ‘Kilmat 50 vs 80’ or ‘Kilmat 80 mil vs 100 mil’.
The numbers here refer to the thickness of the material – the higher the number, the thicker the product, and usually, the better its sound-deadening performance. Kilmat installation is simple and the product can be bought from a variety of platforms, including ‘Amazon Kilmat’, making it a convenient choice.
Where is Siless made, you might ask? Siless is manufactured in Europe, with stringent quality checks that ensure you get a top-quality product.
They also offer the ‘Siless Hybrid 3 in 1’, a multi-purpose product that gets rave reviews for its excellent sound and heat insulation performance.
if weight is a concern for your vehicle, you might want to consider lightweight sound-deadening options. Brands like Kilmat, Siless, and even alternatives like Soundshield or Hushmat (often compared in ‘Hushmat vs Dynamat’ debates) offer lightweight products that don’t compromise on performance.
In fact, a ‘Fatmat vs Dynamat’ or ‘Noico vs Siless’ comparison might yield options that are lighter yet as effective as their counterparts.
So, whether it’s a ‘Kill mat sound deadener’ or a ‘Kilmat car sound deadening mat’, the right choice often depends on your specific needs and budget.
FAQs For Kilmat vs Siless
Kilmat and Siless are common choices for soundproofing automobiles. Here are some common queries about these products.
how do Kilmat and Siless compare in terms of price?
Kilmat costs between $0.42 to $1.12 per square foot, depending on the roll size. A 50 sq. ft. Kilmat roll is about $30 and a 100 sq. ft. roll is about $60. Meanwhile, Siless ranges from $0.40 to $0.75 per square foot, depending on size of the roll. A 50 sq. ft. Siless roll costs around $25 and a 100 sq. ft. roll is around $50.
Which material is thicker, Kilmat or Siless?
Kilmat is thicker than Siless. The Kilmat product listed in the search results has an 80 mil thickness, while the Siless product listed has a thickness of only 2 mM or 0.08 inches
Can Kilmat and Siless mats be used for other applications besides cars?
Yes, according to the search results, Kilmat and Siless mats can be used for other applications besides cars. While both products are marketed as sound-deadening mats for vehicles, they can also be used in other settings where soundproofing or insulation is needed, such as in homes or offices
What is Kilmat used for?
Kilmat is primarily used for sound deadening in vehicles. It helps to reduce unwanted noise and vibrations, enhancing the overall audio quality and comfort within the vehicle.
Is Kilmat worth it?
Yes, Kilmat is considered worth it by many users. It offers an effective and affordable solution for sound deadening. However, the value can depend on your specific needs and expectations.
Does Kilmat work as insulation?
Yes, Kilmat does work as insulation. It not only dampens sound but also provides thermal insulation, helping to maintain a comfortable temperature within the vehicle.
Is Kilmat waterproof?
Yes, Kilmat is waterproof. Its water-resistant properties contribute to its durability and effectiveness in various conditions.
Kilmat and Siless hush-up sounds in cars. Kilmat uses butyl rubber and foil, while Siless has more sound-blocking foam. Siless seems to be better at hushing noise, but Kilmat lasts longer and works better.
They’re both easy to set up and not pricey compared to other noise blockers. Remember to study and think about your car, budget, and heat before you decide between Kilmat and Siless.